VEK-M4D 4-Channel Vehicle Loop Detector

The Feig Electronic VEK-M4D is a 4-Channel vehicle loop detector for parking and traffic vehicle detection applications. The VEKM4D was designed to monitor installations with up to 4 loops with a single vehicle detection system. The 4 inductive loop detectors cannot interfere with each other due to its multiplexing technology. When used as gate or traffic loop detector, or other inductive loop installations, the VEKM4D will always provide a satisfactory result.

The Feig Electronic VEK-M4D loop detectors come in a small form factor that fits in all spaces and mounts on a standard 35mm DIN Rail.

Applications:

Parking Garages and open lots
Access control
Gate loop detector
Traffic loop detector
Traffic detector loops
Induction loop installation
Traffic detector
Gate loop

Special Characteristics

Plastic housing with compact size to be mounted directly on DIN – or C-rail
Direct cabling, no plug socket
RS485 or CAN BUS interface
Open collector outputs
Microprocessor controlled
Isolation transformer between loop and detector electronics
Automatic Calibration when switching on or when changing the adjustment of holding time
Adjustment of unlimited holding time possible
Indication with LED`s
All adjustments with DIP – switch on front panel
Adjustments of relay functionality

Features
Isolation transformer between loop and detector electronics
Automatic calibration when switching on or changing the adjustment of holding time
Plastic housing with compact size to be mounted directly on DIN-rail (wiring on the housing)
Adjustment of unlimited holding time possible
Directional Logic
Permanent or pulse output adjustable